RigPix logo

Alinco logo


Back to main

Back to Alinco

Next mobile VHF/UHF


Copyright logo


Last modified 2024-03-27

Valid HTML 4.01 Transitional

Alinco DR-570T

A picture of Alinco DR-570T

SPECIFICATIONS

GENERAL
Type:Amateur VHF/UHF transceiver
Frequency range: USA
TX: 144-148 / 440-450 MHz
RX: 144-148 / 440-450 MHz
Tuning steps:5 / 10 / 12.5 / 20 / 25 KHz
Frequency stability:±? ppm
Mode:FM
Channels / memory management: 20 regular (10 per band)
2 call (1 per band)
2 scan edge pairs (Program scan), 1 per band
Priority function
Repeater shift / offset: VHF: ±600 KHz
UHF: ±1.6, 5 and 7.6 MHz
Power supply:13.8 VDC
Current drain / power consumption:RX: 500 mA (Squelched)
TX: Max 10.3 A
Antenna impedance / connector:50 ohm / SO-239 (On pigtail)
Dimensions (W*H*D):150*50*173 mm (5.9*1.97*6.81")
Weight:1.7 Kg (3.75 lb)
Other features:CTCSS/PL. DTMF encoder. Twin RX.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 10.7 MHz (VHF) - 30.825 MHz (UHF)
2nd IF: 455 KHz
Sensitivity:0.16 uV (12 dB SINAD)
Selectivity:12 KHz (-6 dB)
24 KHz (-60 dB)
Image rejection:
AF output power / speaker:1.5 W at 10% distortion / 8 ohm
External speaker connector:3.5 mm




TRANSMITTER SECTION
RF output power:

HighLow
2 m:45 W5 W
70 cm:35 W5 W
Modulation system:Variable reactance
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:? ohm / 8-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 19xx-19xx (Discontinued)
Additional info:
Related documents:User manual (175 KB)
Modifications and fixes:
Reviews:
Options / Accessories:
- -