RigPix logo

Alinco logo


Back to main

Back to Alinco

Next mobile VHF/UHF


Copyright logo


Last modified 2024-03-27

Valid HTML 4.01 Transitional

Alinco DR-435T

A picture of Alinco DR-435T

SPECIFICATIONS

GENERAL
Type:Amateur UHF transceiver
Frequency range: USA
TX: 430-450 MHz
RX: 350-512 MHz
Tuning steps:5 / 8.33 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 KHz
Frequency stability:±5 ppm (No temperature reference)
Mode:FM / NFM
Channels / memory management: 100 regular with alpha tags
1 call
1 scan edge pair (Program scan)
10 DTMF autodial
Non-volatile EEPROM storage
Repeater shift / offset:±0 to 99.995 MHz
Power supply:11.7-15.8 VDC
Current drain / power consumption:RX: 400-600 mA
TX: Max 10 A
Antenna impedance / connector:50 ohm / ?
Dimensions (W*H*D):142*40*174 mm (5.59*1.58*6.85")
Weight:1 Kg (2.2 lb)
Other features:CTCSS/PL and DCS. Theft alarm. 1K2 / 9K6 TNC option. GPS input for APRS.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 30.85 MHz
2nd IF: 455 KHz
Sensitivity:0.25 uV (12 dB SINAD)
Selectivity:FM: -65 dB (Adjacent channel)
NFM: -55 dB (Adjacent channel)
Image rejection:70 dB
AF output power / speaker:2 W at 10% distortion / 8 ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:

HighMidLow
70 cm:35 W10 W5 W
Modulation system:Variable reactance frequency modulation
Max FM deviation (Factory set):FM: ±5 KHz
NFM: ±2.5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:2 Kohm / 8-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 2001-200x (Discontinued)
Additional info:
Related documents:Service manual (5.2 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
- -