RigPix logo

Alinco logo


Back to main

Back to Alinco

Next mobile VHF/UHF


Copyright logo


Last modified 2024-03-27

Valid HTML 4.01 Transitional

Alinco DR-435E MKII

A picture of Alinco DR-435E MKII

SPECIFICATIONS

GENERAL
Type:Amateur UHF transceiver
Frequency range: Europe
TX: 430-440 MHz
RX: 350-512 MHz

NB! The extended RX frequency range
may require modification
Tuning steps:5 / 8.33 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 KHz
Frequency stability:±2.5 ppm (No temperature reference)
Mode:FM / NFM (DV option)
Channels / memory management: 100 regular with alpha tags
1 call
1 scan edge pair (Program scan)
10 DTMF autodial
Non-volatile EEPROM storage
Repeater shift / offset:±0 to 99.995 MHz
Power supply:13.8 VDC ±15%
Current drain / power consumption:RX: 400-600 mA
TX: Max 10 A
Antenna impedance / connector:50 ohm / ?
Dimensions (W*H*D):142*40*174 mm (5.59*1.58*6.85")
Weight:1 Kg (2.2 lb)
Other features: CTCSS/PL and DCS. GPS input for APRS. 1K2/9K6bd packet (EJ-41U) and
10F3 digital voice board (EJ-47U) options




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 30.85 MHz
2nd IF: 455 KHz
Sensitivity:0.16 uV (12 dB SINAD)
Selectivity: FM:
12 KHz or more (-6 dB)
28 KHz or less (-60 dB)
NFM:
6 KHz or more (-6 dB)
16 KHz or less (-60 dB)
Image rejection:
AF output power / speaker:2 W at 10% distortion / 8 ohm
External speaker connector:3.5 mm




TRANSMITTER SECTION
RF output power:

HighMidLow
2 m:35 W10 W5 W
Modulation system:Variable reactance frequency modulation
Max FM deviation (Factory set):FM: ±5 KHz
NFM: ±2.5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:2 Kohm / 8-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 2003-200x (discontinued)
Additional info:
Related documents:Service manual (4.3 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
- -