RigPix logo

Alinco logo


Back to main

Back to Alinco

Next mobile VHF/UHF


Copyright logo


Last modified 2022-11-20

Valid HTML 4.01 Transitional

Alinco DR-130E

A picture of Alinco DR-130E

SPECIFICATIONS

GENERAL
Type:Amateur VHF transceiver
Frequency range: Europe
TX: 144-146 MHz
RX: 144-146 MHz
Tuning steps:5 / 10 / 12.5 / 15 / 20 / 25 KHz
Frequency stability:? ppm
Mode:FM
Channels / memory management: 20 regular (Expandable)
Priority function
Repeater shift / offset:0 to 15.995 MHz
Power supply:13.8 VDC 10%
Current drain / power consumption:RX: 800 mA (Squelched)
TX: Max 10.5 A
Antenna impedance / connector:50 ohm / SO-239 (On pigtail)
Dimensions (W*H*D):140*40*155 mm (5.51*1.58*6.1")
Weight:860 g (1.9 lb)
Other features:CTCSS/PL encoder. 1750 Hz tone call.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 17.2 MHz
2nd IF: 455 KHz
Sensitivity:0.16 uV (12 dB SINAD)
Selectivity:12 KHz (-6 dB)
30 KHz (-60 dB)
Image rejection:
AF output power / speaker:2.5 W at 10% distortion / 8 ohm
External speaker connector:3.5 mm




TRANSMITTER SECTION
RF output power:

HighLow
2 m:50 W5 W
Modulation system:Variable reactance frequency modulation
Max FM deviation (Factory set):5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:? ohm / 8-pin (Metal locking ring connetor)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 19xx-19xx (Discontinued)
Additional info:
Related documents:User manual (400 KB)
Modifications and fixes:
Reviews:
Options / Accessories:
EJ-19U
EJ-20U
Memory expansion unit (100 channels)
CTCSS/PL decoder unit