RigPix logo

Alinco logo


Back to main

Back to Alinco

Next HF and more


Copyright logo


Last modified 2024-03-27

Valid HTML 4.01 Transitional

Alinco DR-03T

A picture of Alinco DR-03T

SPECIFICATIONS

GENERAL
Type:Amateur HF transceiver
Frequency range: TX: 28.0-29.7 MHz
RX: 28.0-29.7 MHz
Tuning steps:5 / 8.33 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 KHz
Frequency stability:±7 ppm (No temperature reference)
Mode:FM
Channels / memory management: 100 regular with alpha tags
1 call
10 DTMF auto-dialer
1 scan edge pair
Non-volatile EEPROM storage
Repeater shift / offset:±0 to 99.95 MHz
Power supply:13.8 VDC ±15%
Current drain / power consumption:RX: 400-600 mA
TX: Max 3 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):142*40*174 mm (5.59*1.58*6.85")
Weight:1 Kg (2.2 lb)
Other features: CTCSS/PL and DCS with tone scan. Dimmer. Theft alarm.
1000 / 1450 / 1750 / 2100 Hz tone call. Cloning.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 10.7 MHz
2nd IF: 450 KHz
Sensitivity:0.25 uV (12 dB SINAD)
Selectivity: 12 KHz (-6 dB)
28 KHz (-60 dB)
Image rejection:
AF output power / speaker:2 W at 10% distortion / 8 ohm
External speaker connector:3.5 mm




TRANSMITTER SECTION
RF output power:

HighMidLow
10 m:10 W5 W1 W
Modulation system:Variable reactance
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -40 dB
Microphone impedance / connector:2 Kohm / 8-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 2008-20xx
Additional info:
Related documents:User manual (1.2 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
ADALM135
EMS-53
EMS-57
FM0078Z
UA0038
UX1259
UX1260
Alarm cable kit
Hand microphone with DTMF keypad
Hand microphone
Mobile mounting bracket
DC power cable with fuse holder
Alarm cable A, with wire
Alarm cable B (Extension use)