RigPix logo

Alinco logo


Back to main

Back to Alinco

Next receiver


Copyright logo


Last modified 2024-03-18

Valid HTML 4.01 Transitional

Alinco DJ-X10T

A picture of Alinco DJ-X10T

SPECIFICATIONS

GENERAL
Type:HF/VHF/UHF receiver/scanner
Frequency range: USA
0.1-824 / 850-869 / 895-2000 MHz
Tuning steps:50 / 100 Hz
1 / 2 / 5 / 6.25 / 9 / 10 / 12.5 / 15 / 20 / 25
30 / 50 / 100 / 125 / 150 / 200 / 250 / 500 KHz
Frequency stability:±10 ppm @ -10 to +50°C (14 to 122°F)
Mode:AM / FM / WFM / SSB / CW
Channels / memory management: 1200 regular in 30 banks with alpha tags
1000 pass
1 priority
20 scan edge pairs (Program scan)
Power supply:4.5-6 VDC (Depending on battery pack) or 8-15 VDC external
Current drain / power consumption:30-200 mA
Antenna impedance / connector:50 ohm / BNC
Dimensions (W*H*D):57*150*28 mm (2.24*5.9*1.1")
Weight:320 g (11.29 oz)
Other features: Channel scope. 24 hr clock & timer. PC-programable. Cloning.
Backlit display.




RECEIVER SECTION
Receiver system: Triple conversion superheterodyne
1st IF: 736.25 / 275.45 MHz
2nd IF: 45.05 MHz
3rd IF: 455 KHz / 10.7 MHz (WFM) KHz
Sensitivity: AM (10 dB S/N)
0.1-0.5 MHz: 10 uV
0.5-5 MHz: 1.5 uV
5-1000 MHz: 1 uV
FM (12 dB SINAD)
5-30 MHz: 0.35 uV
30-1000 MHz: 0.25 uV
1000-1300 MHz: 1.5 uV
1300-2000 MHz: 10 uV
WFM (12 dB SINAD)
30-1000 MHz: 1.5 uV
SSB (10 dB S/N)
0.5-5 MHz: 0.5 uV
5-30 MHz: 0.25 uV
30-1000 MHz: 0.5 uV
Selectivity: AM/FM:
15 KHz (-6 dB)
WFM:
150 KHz (-6 dB)
SSB/CW:
4 KHz (-6 dB)
Image rejection:
AF output power / speaker:100 mW at 10% distortion / ? ohm
External speaker connector:




MISCELLANEOUS
Manufactured:Japan, 1997-200x (Discontinued)
Additional info:
Related documents:User manual (711 KB)
Modifications and fixes:
Reviews:
Options / Accessories:
EBC-6
EBP-33N
EBP-34N
EBP-37N
EDC-36
EDC-37
EDC-60
EDC-61
EDC-63
EDC-64
EDH-16
EME-6
ESC-28
ESC-29
ESC-30
Mobile bracket
NiCd battery pack. 4.8 V, 650 mAh
NiCd battery pack. 4.8 V, 1200 mAh
NiCd battery pack. 4.8 V, 700 mAh
Cigarette lighter cable with active filter
DC cable for base station use
Quick charger (120 VAC)
Quick charger (220 VAC)
Wall charger (120 VAC)
Wall charger (220 VAC)
Battery case (Four LR6/AA batteries)
Earphone
Soft case (For use with EBP-33N)
Soft case (For use with EBP-37N)
Soft case (For use with EBP-34N)