RigPix logo

Alinco logo


Back to main

Back to Alinco

Next HT/portable


Copyright logo


Last modified 2024-03-19

Valid HTML 4.01 Transitional

Alinco DJ-180T

A picture of Alinco DJ-180T

SPECIFICATIONS

GENERAL
Type:Amateur *** transceiver
Frequency range: USA
TX: 144-148 MHz
RX: 137-174 MHz
Tuning steps:5 / 10 / 12.5 / 15 / 20 / 25 KHz
Frequency stability:±? ppm
Mode:FM
Channels / memory management: 10 regular (50 or 200 channel option)
1 call
Repeater shift / offset:±0 to 15.995 MHz in 5 KHz steps
Power supply:7-12 VDC (Depending on battery pack)
or 5.5-13.8 VDC external
Current drain / power consumption:RX: ? mA
TX: Max ? A
Antenna impedance / connector:50 ohm / BNC
Dimensions (W*H*D):58*132*33 mm (2.28*5.2*1.3")
Weight:350 g (12.35 oz)
Other features:DTMF keypad. CTCSS/PL.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 21.4 MHz
2nd IF: 455 KHz
Sensitivity:0.15 uV (12 dB SINAD)
Selectivity:
Image rejection:
AF output power / speaker:? mW at ?% distortion / ? ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:

High
@12V
High
@7.2V
Low
2 m:5 W2 W? mW
Modulation system:Variable reactance frequency modulation
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / ?-pin
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1996-199x (Discontinued)
Additional info:
Related documents:User manual (148 KB)
Modifications and fixes:
Reviews:
Options / Accessories:
EBC-6
EBP-24N
EBP-26N
EBP-28N
EDC-49
EDC-50
EDH-11
EDH-12
EJ-13U
EJ-14U
EJ-15U
EME-12
EME-13
EME-15
EMS-9
ESC-18
ESC-19
Mobile bracket
NiCd battery pack, long-life. 7.2 V, 1200 mAh
NiCd battery pack. 7.2 V, 700 mAh
NiCd battery pack. 12 V, 700 mAh
Wall charger (117 VAC)
Wall charger (220-240 VAC)
Dry cell case (Six LR6 / AA batteries)
DC in unit
DTMF encoder with keypad (For some versions)
50 channel memory unit
200 channel memory unit
Headset (Ear hook)
Headset (Inner)
Tie-pin microphone
Speaker-microphone
Soft case
Soft case