RigPix logo

Alinco logo


Back to main

Back to Alinco

Next HT/portable


Copyright logo


Last modified 2024-03-18

Valid HTML 4.01 Transitional

Alinco ALX-2T

A picture of Alinco ALX-2T

SPECIFICATIONS

GENERAL
Type:Amateur VHF transceiver
Frequency range: USA
TX: 144-148 MHz
RX: 144-148 MHz
Tuning steps:10 / 100 KHz, 1 MHz (Thumbwheels) + a 5 KHz pushbutton
Frequency stability:±? ppm
Mode:FM
Channels / memory management: 1 regular
Priority function
Stored by three rotary switches and one slide switch
Repeater shift / offset:±600 KHz
Power supply:7-9.6 VDC (Depending on battery pack)
Current drain / power consumption:RX: 25 mA (Squelched, saver on)
TX: Max 750 mA @ 2 W
Antenna impedance / connector:50 ohm / Threaded phono (RCA)
Dimensions (W*H*D):58*141*23 mm (2.28*5.55*0.9")
Weight:240 g (8.47 oz), with EBP-2N and antenna
Other features:DTMF keypad. Illuminated thumbwheels.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 16.9 MHz
2nd IF: 455 KHz
Sensitivity:0.25 uV (12 dB SINAD)
Selectivity:15 KHz (-6 dB)
30 KHz (-60 dB)
Image rejection:
AF output power / speaker:200 mW at 10% distortion / 8 ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:

HighLow
2 m:2-3 W400 mW

NB! The high output level depends on voltage/battery pack
Modulation system:Reactance modulation
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:? ohm / ?-pin
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1987-1988 (Discontinued)
Additional info:
Related documents: User manual (665 KB)
RF power module: Mitsubishi M57796MA
Modifications and fixes:
Reviews:73 Amateur Radio: December 1987, page 16
Options / Accessories:
EBP-2N
EBP-3N
EBP-6N
EDC-4
EDC-6
EDC-7
NiCd battery pack. 7.2 V, 160 mAh
NiCd battery pack. 7.2 V, 450 mAh
NiCd battery pack. 9.6 V, 450 mA
AC adapter (USA)
AC adapter (Europe)
Battery charger