RigPix logo

Yaesu logo


Back to main

Back to Yaesu

Next HF and more


Copyright logo


Last modified 2015-08-28

Yaesu FT-410

A picture of Yaesu FT-410
Specifications are preliminary and may change

SPECIFICATIONS

GENERAL
Type:Amateur HF transceiver
Frequency range:TX: 10-160 m
RX: 0.03-30 MHz
Tuning steps:10 Hz / 1 KHz
Mode:AM/SSB/CW
Channels/memory management:
Repeater shift/offset:No
Power supply:13.8 VDC 15%
Current drain/power consumption:RX: Max 3.5 A
TX: Max 23 A
Antenna impedance/connector:50 ohms / SO-239
Dimensions (W*H*D):229*84*217 mm (9*3.3*8.5")
Weight:4 Kg (8.8 lbs)
Other features:CAT interface




RECEIVER SECTION
Receiver system:Double conversion superheterodyne
1st IF: 67.899 MHz
2nd IF: 24 KHz
Sensitivity: AM (6 KHz, 10 dB S+N/N)
1.8-30 MHz: 2 uV
SSB/CW (2.4 KHz, 10 dB S+N/N)
0.5-30 MHz: 0.25 uV
Selectivity: AM
6 KHz (-6 dB), 20 KHz (-60 dB)
SSB/CW Wide
2 KHz (-6 dB), 4.5 KHz (-60 dB)
CW Narrow
300 Hz (-6 dB), 1.2 KHz (-60 dB)
Image rejection:80 dB
AF output power/speaker:10 W at 5% distortion / 4 ohms
External speaker connector:3.5 mm, 4-16 ohms




TRANSMITTER SECTION
RF output power: AM: Max 25 W (carrier)
SSB/CW: Max 100 W
Modulation system:AM: Low-level (early stage)
SSB: Balanced
Max FM deviation:No FM
Spurious emissions:Less than -50 dB
Microphone impedance/connector:200 to 10 kohm (600 ohms nominal) / 8-pin




MISCELLANEOUS
Manufactured:Japan, 2015-201x
Additional info:
Related documents:
Modifications:
Options/Accessories:
- -
A rear picture of Yaesu FT-410