RigPix logo

Icom logo


Back to main

Back to Icom

Next mobile VHF/UHF


Copyright logo


Last modified 2021-02-16

Valid HTML 4.01 Transitional

Icom IC-22S

A picture of Icom IC-22S

SPECIFICATIONS

GENERAL
Type:Amateur VHF transceiver
Frequency range:TX: 146-148 MHz
RX: 146-148 MHz
Tuning steps:Channelized (15 KHz increments)
Frequency stability:Max ? ppm
Mode:FM
Channels/memory management:23 (diode programmable)
Repeater shift/offset:600 KHz
Power supply:13.8 VDC
Current drain/power consumption:RX: 400-700 mA
TX: 0.9-2 A
Antenna impedance/connector:50 ohm / SO-239
Dimensions (W*H*D):156*58*218 mm (6.14*2.3*8.6")
Weight:1.9 Kg (4.19 lb)
Other features:




RECEIVER SECTION
Receiver system:Double conversion superheterodyne
1st IF: 10.7 MHz
2nd IF: 455 KHz
Sensitivity:0.4 uV
Selectivity:15 KHz (-6 dB), 30 KHz (-60 dB)
Image rejection:
AF output power/speaker:1.5 W at ?% distortion / 8 ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:

HighLow
2 m:10 W1 W
Modulation system:
FM deviation:5 KHz
Spurious emissions:Less than -60 dB
Microphone impedance/connector:500 ohm / 4-pin (Metal locking ring connector)
Microphone input sensitivity:? mV




MISCELLANEOUS
Manufactured:197x-197x (Discontinued)
Additional info:Early PLL transceiver
Related documents:
Modifications and fixes:
Reviews:
Options/Accessories:
- -
An inside top picture of Icom IC-22S
An inside bottom picture of Icom IC-22S
A rear picture of Icom IC-22S