RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


Anytone logo


Copyright logo


Last modified 2022-01-12

Valid HTML 4.01 Transitional

AnyTone AT-6666

A picture of AnyTone AT-6666

SPECIFICATIONS

GENERAL
Type:Citizen band / "Freeband" / Export transceiver
Frequency range:25.615-30.105 MHz
Channels / tuning steps:100 Hz, 1 / 10 / 100 KHz, 1 MHz
Mode:AM / FM / SSB
Frequency control:PLL
Frequency stability:±5 ppm @ -20 to +50°C (-4 to +122°F)
Clarifier or Delta tune:±? Hz
Power supply:13.8 VDC ±10%
Current drain / power consumption:RX: ? mA
TX: Max 12 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):157*48*246 mm (6.2*1.9*9.7")
Weight:1.5 Kg (3.31 lb)
Other features: PA. 6 memories. Dual watch. Roger beep. Digital echo. NB. SWR protection.
Multi-color backlite. +10 KHz function. PC-programmable (Mini USB).
Repeater offset. Optional CTCSS/PL and DCS encoder/decoder.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne (AM/FM)
1st IF: 10.695 MHz
2nd IF: 455 KHz
Single conversion superheterodyne (SSB)
1st IF: 10.695 MHz
Sensitivity: AM: 1 uV (10 dB S+N/N)
FM: 1 uV (20 dB S+N/N)
SSB: 0.25 uV (10 dB S+N/N)
Selectivity: AM/FM: 60 dB (Adjacent channel)
SSB: 70 dB (Adjacent channel)
Image rejection:65 dB
AF output power / speaker:3 W at ?% distortion / 8 ohm
External speaker connector:3.5 mm, 8 ohm




TRANSMITTER SECTION
RF output power: AM: 15 W
FM: 45 W
SSB: 60 W (PEP)
Modulation system:
Max FM deviation (Factory set):±? KHz
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / 6-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:China, 2014-201x
Main PCB:
Sub PCBs:
Additional info:
Related documents: User manual (3 MB)
Four 13N10 finals
Sams Photofact #:None
Modifications and fixes:
Reviews:
Options / Accessories:
?
?
CTCSS/PL & DCS board
PC-programming cable (USB)
An inside picture of AnyTone AT-6666
A rear picture of AnyTone AT-6666