RigPix logo

AOR logo


Back to main

Back to AOR

Next receiver/scanner


Copyright logo


Last modified 2016-12-08

AOR AR-DV1

A picture of AOR AR-DV1

SPECIFICATIONS

GENERAL
Type:HF/VHF/UHF receiver/scanner
Frequency range:0.1-1300 MHz
(cellular blocked in the USA)
Tuning steps:10 / 50 100 / 500 Hz
1 / 2 / 5 / 6.25 / 7.5 / 8.33 / 9 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 / 100 / 500 KHz
Mode: Analog:
AM/AM-synchro/FM/NFM/WFM/SSB/CW

DV modes:
AlincoGMSKAMBE
AORDQPSKAMBE
Apco P25C4FMIMBE
D-StarGMSKAMBE
DCR/NXDNC4FMAMBE+2
DMR/MotoTRBOC4FMAMBE+2
dPMRC4FMAMBE+2
YaesuC4FMAMBE+2
TetraDMO only,firmware v1609D and newer
Channels/memory management:2000 regular in 40 banks
1 priority
50 pass per bank or VFO
Power supply:10.8-16 VDC
Current drain/power consumption:Max 800 mA
Antenna impedance/connector:50 ohms / BNC
Dimensions (W*H*D):178*50*214 mm (7-1/64*2*8-27/64")
Weight:1.5 Kg (3 lbs 5 oz)
Other features:CTCSS/PL, DCS, DSP functions, clock/timer/alarm, Audio recording,
Discriminator output, SD card slot, Micro-USB connector, Analog
voice descrambler (not all versions)




RECEIVER SECTION
Receiver system:Direct sampling SDR (0.1-18 MHz)
Double conversion superheterodyne (18-180 MHz)
1st IF: 393.0 MHz
2nd IF: 31.0 MHz
Triple conversion superheterodyne (180-1300 MHz)
1st IF: 1705 MHz
2nd IF: 393.0 MHz
3rd IF: 31.0 MHz
Sensitivity:0.53-18 MHz: -3dBu (12 dB SINAD)
18-1300 MHz: -10 dBu (12 dB SINAD)
Selectivity:
Image rejection:
AF output power/speaker:1 W at ?% distortion / 8 ohms
External speaker connector:




MISCELLANEOUS
Manufactured:Japan, 2015-201x
Additional info:
Related documents:
Modifications:
Options/accessories:
- -
A rear picture of AOR AR-DV1