RigPix logo

Alinco logo


Back to main

Back to Alinco

Next HT/portable


Copyright logo


Last modified 2024-03-19

Valid HTML 4.01 Transitional

Alinco DJ-596J

A picture of Alinco DJ-596J

SPECIFICATIONS

GENERAL
Type:Amateur VHF/UHF transceiver
Frequency range: Japanese domestic market
TX: 144-146 / 430-440 MHz
RX: 144-146 / 430-440 MHz
Tuning steps:? KHz
Frequency stability:±? ppm
Mode:FM
Channels / memory management: 100 regular
Repeater shift / offset:±?
Power supply:6-10 VDC (Depending on battery pack)
or 6-16 VDC external (Barrel connector, center positive)
Current drain / power consumption:RX: 25-160 mA
TX: Max 1.4 A
Antenna impedance / connector:50 ohm / BNC
Dimensions (W*H*D):56*124*37 mm (2.2*4.88*1.46")
Weight:310 g (10.93 oz), with battery and antenna
Other features: CTCSS/PL and DCS. Theft alarm and mosquito repel feature.
Digital voice board option (Requires at least two similarly equipped radios).




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: ? MHz
2nd IF: ? KHz
Sensitivity:
Selectivity:
Image rejection:
AF output power / speaker:? mW at ?% distortion / ? ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:

High
@13.8V
Low 1
2 m:5 W800 mW
70 cm:5 W800 mW
Modulation system:Variable reactance
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / ?-pin
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 200x-200x (Discontinued)
Additional info:
Related documents:
Modifications and fixes:
Reviews:
Options / Accessories:
- -